| ◄► |
|
|
|||
|
|||||
The dialog configures an object to be installed into a duct segment. The function covers the following subgroups:
- Canvas connection
- Blank object
- Connection element
Settings, functions and parameters
Properties
/ 
Length / Width / Height
The fields show the dimensions of the object or expect you to enter the desired values.
The input is blocked,
if the size is determined by the selected product.
The input is enabled,
when a size = 0 in the settings of the selected product.
The Height parameter is only relevant for objects in rectangular ducts.
| Duct | Effect |
|---|---|
| Circular |
The object is cylindrical. The Width value corresponds to the diameter.
|
| Rectangular |
The object is cuboid.
|
Duct
Dimension / Medium
The fields show the dimension and the medium of the ventilation duct in which the object is located.
Placement
Insert centered
|
Example: Fan |
||
|---|---|---|
| Setting | Effect | |
|
|
|
The symbol is centered. |
|
|
The symbol is passed to an end. |
Rotation
Rotation of the object in degrees (°) around the central axis of the ventilation duct. A change in the value in the positive direction causes a rotation to the right (in the drawing direction of the ventilation duct).
Angle to X-axis
The setting only applies to objects in vertical duct segments. The rotation of the component is defined as angle. At an angle=0, the object is rotated to the right and corresponds to the position of the X-axis. A positive rotation causes the component to rotate counter clockwise.
Product
Number
DDScad differentiates the parts list based on the number (= product number). It is set when the item is selected, but can be entered manually if known.
In parts list
| Setting | Effect |
|---|---|
|
|
The object is included in the parts list. |
|
|
The object is not included in the parts list. |
...
Opens the product database and allows the selection of a product.