Pipework – Terminate
In the storey below

Workflow

1. Guide the pipework to the desired position.
2. Define a fix point by clicking .

3. Pass the pipework to the adjacent storey:

   Keyboard short cut: [Ctrl]+[End]

   Press [Ctrl]+[End].

   Call from the context menu: End in Storey Below

   1. Click . The context menu appears.
   2. Select: End in Storey Below.

   A bend leads vertically down and terminates the pipe in the floor.A symbol marks the passage to the adjacent floor. There, you can continue the pipe.The function remains active. You can set the next starting point.

   

   Note: Navigate in the pipe network

   The object at the end of the pipework is used for navigation in the pipe network. You can follow this pipeline to the destination storey. Workflow

   1. End the function with [ESC].

   2. Select the symbol with a click .
      The symbol appears as a marked object.

      

   3. Click . The context menu appears.
   4. Select:
      Open lower storey and zoom to storey port DDScad opens the storey into which the pipe enters.