Pipework – Terminate
In the storey above

Workflow

1. Guide the pipework to the desired position.
2. Define a fix point by clicking .

3. Pass the pipework to the adjacent storey:

   Keyboard short cut: [Ctrl]+[Home]

   Press [Ctrl]+[Home].

   Call from the context menu: End in Storey Above

   1. Click . The context menu appears.
   2. Select: End in Storey Above.

   A bend leads vertically up and terminates the pipe at the ceiling.A symbol marks the passage to the adjacent floor. There, you can continue the pipe.The function remains active. You can set the next starting point.

   

   Note: Navigate in the pipe network

   The object at the end of the pipework is used for navigation in the pipe network. You can follow this pipeline to the destination storey. Workflow

   1. End the function with [ESC].

   2. Select the symbol with a click .
      The symbol appears as a marked object.

      

   3. Click . The context menu appears.
   4. Select:
      Open upper storey and zoom to storey port DDScad opens the storey into which the pipe enters.