Ventilation duct – Terminate
In the storey below

Example

Suppose you want to transfer the duct to the storey below.

Workflow

  1. Press [Ctrl]+[End].

    A bend leads vertically down and terminates the duct in the floor.The function remains active. You can set the next starting point. A transfer point is created in the lower storey. There, you can continue the duct.

  1. Click . The context menu appears.
  2. Select: End in Storey Below.
    A bend leads vertically down and terminates the duct in the floor. The function remains active.You can set the next starting point. A transfer point is created in the lower storey. There, you can continue the duct.