Object handling – Set mounting height

Change mounting height by difference

The operation changes the installation height with a difference from the current value.

Application Press [PgUp] for an upward movement. [PgDn] for a downward movement. The dialog appears: Relative from Position Enter the desired height change. You can use different unit of lengths. Click OK. The object has changed its installation height by the entered value. You can perform the next operation.

Define mounting height as absolute value

The operation defines the absolute height of the installation with respect to the upper edge of the finished floor.

Application Press [Home] The dialog appears: Set Height Enter the desired mounting height. You can use different unit of lengths. Click OK. The object is located at the defined height. You can perform the next operation.