| ◄► |
|
|
|||
|
|||||
| Object | Rot./Pos./Scale |
| Calculation | Marker |
| Attributes | Connection |
The dialog configures an object to pump liquids through pipes.
Settings, functions and parameters
Properties
/ Length / Width / Diameter
The fields show the main dimensions of the selected object.
Pipe
Dimension / Medium
Dimension and the medium of the pipe in which the object is located.
Placement
Insert centered
|
Example: Valve |
||
|---|---|---|
| Setting | Effect | |
|
|
|
The symbol is centered. |
|
|
The symbol is passed to an end. |
Turn direction
The setting applies to objects with an indication of the direction.
|
Example: Pump |
||
|---|---|---|
| Setting | Effect | |
|
|
|
The object is reversed when inserted. |
|
|
|
The object is inserted in the original direction. |
Rotation
Rotation of the object in degrees (°) around its center axis. A positive angle causes a rotation to the right (relative to the drawing direction).
Angle to X-axis
The settings are only available for objects in vertical segments. The rotation of the component is defined as angle. At an angle=0, the object is rotated to the right and corresponds to the position of the X-axis. A positive rotation causes the component to rotate counter clockwise.
Type
Number
DDScad differentiates the parts list based on the number (= product number). It is set when the item is selected, but can be entered manually if known.
In parts list
| Setting | Effect |
|---|---|
|
|
The object is included in the parts list. |
|
|
The object is not included in the parts list. |
...
Opens the product database and allows the selection of a product.