Electrical - KNX

KNX in the distributor

The topic KNX has been redesigned. The changes in the distributor structure concern the selection and configuration of circuits. The are considered in its specific aspects here:

• Sheet management and working with existing projects
• The KNX symbols and their interaction
• Circuit layouts for automatic switchboard plans
• Arrangement in the main selection of the function "New circuit"
• Overview of KNX circuit layouts
• Subsequent modification of circuits (examples)
• KNX components as independent symbols

---

Circuit layout Show example KNX Bus system multi line single line KNX Power supply /1xMCB/ KNX Bus connection on Terminal /1x4 Leads KNX Device without Connections KNX Device only for Devicelist MPS KNX Output 2-fold /2xMCB/2x3 Leads KNX Output 4-fold /4xMCB/4x3 Leads KNX Output 4-fold (2x2 Canal) /2xMCB/4x3 Leads KNX Output 6-fold /6xMCB/6x3 Leads KNX Output 8-fold /8xMCB/8x3 Leads KNX Output 8-fold (4x2 Canal) /4xMCB/8x3 Leads KNX Output 10-fold /10xMCB/10x3 Leads KNX Output 12-fold (Start) /8xMCB /8x3 Leads -> Output 12-fold (End ) /4xMCB /4x3 Leads KNX Output 16-fold (Start) /8xMCB /8x3 Leads -> Output 16-fold (End ) /8xMCB /8x3 Leads KNX Jalousie 4-fold (2x2 Canal) /2xMCB/4x4 Leads KNX Jalousie 4-fold (2x2 Canal) /2xMCB/4x5 Leads KNX Jalousie 4-fold /4xMCB/4x4 Leads KNX Jalousie 4-fold /4xMCB/4x5 Leads KNX Jalousie 6-fold /6xMCB/6x4 Leads KNX Jalousie 6-fold /6xMCB/6x5 Leads KNX Jalousie 8-fold (4x2 Canal) /4xMCB/8x4 Leads KNX Jalousie 8-fold (4x2 Canal) /4xMCB/8x5 Leads KNX Lightcontrol 2-fold 1-10V /2xMCB/4x Cable KNX Lightcontrol 4-fold 1-10V /4xMCB/8x Cable KNX Lightcontrol 8-fold DALI /1xMCB/9x2 Leads KNX DALI Gateway 1-fold (2x64TN) /1xMCB/2x2 Leads KNX DALI Gateway 1-fold (1x64TN) /1xMCB/1x2 Leads KNX DALI Gateway 8-fold /1xMCB/8x2 Leads KNX Switch-/Dimm act. 2-fold, 1-10V/2xMCB/2x5 Leads KNX Switch-/Dimm act. 4-fold, 1-10V/4xMCB/4x5 Leads KNX Switch-/Dimm act. 8-fold, 1-10V/8xMCB/8x5 Leads KNX Dimm actuator 2-fold /2xMCB/2x3 Leads KNX Dimm actuator 4-fold /4xMCB/4x3 Leads KNX Dimm actuator 6-fold /6xMCB/6x3 Leads KNX Binary input 2x2-fold (int.Power) /2x5 Leads KNX Binary input 2x2-fold (AC) /1xMCB/2x5 Leads KNX Binary input 4-fold (AC) /1xMCB/4x3 Leads KNX Binary input 4-fold (AC) /1xMCB/4x5 Leads KNX Binary input 8-fold (int. Power) /8x3 Leads KNX Binary input 8-fold (AC) /1xMCB/8x3 Leads KNX Binary input 8-fold (AC) /1xMCB/8x5 Leads KNX Binary input 9-fold (int. Power) /9x3 Leads KNX Binary input 9-fold (AC) /1xMCB/9x3 Leads KNX Binary input 9-fold (AC) /1xMCB/9x5 Leads Low voltage Power Supply (Level 3)/1xMCB KNX Binary input 2x2-fold (DC) /2x5 Leads KNX Binary input 6-fold (DC) /2x5 Leads KNX Binary input 8-fold (DC) /8x3 Leads KNX Binary input 9-fold (DC) /9x3 Leads KNX single Input canal 1x AC /1xMCB/1x5 Leads KNX single Input canal 2x AC /1xMCB/1x5 Leads KNX single Actuator canal 2x /1xMCB/1x5 Leads KNX single Actuator canal 3x /1xMCB/1x5 Leads

KNX Device only for Devicelist MPS The circuit layout creates a KNX component in the circuit list, but has no connection to other sheets. It is designed for independent use of single channel symbols without the block symbol. You can use this circuit layout in connection to circuit layout M1F, M2F, M3F and M4F.