Electrical - KNX

KNX in the distributor

The topic KNX has been redesigned. The changes in the distributor structure concern the selection and configuration of circuits. The are considered in its specific aspects here:


Circuit layout Show example
KNX Bus system multi line single line
KNX Power supply /1xMCB/
KNX Bus connection on Terminal /1x4 Leads
KNX Device without Connections
KNX Device only for Devicelist MPS
KNX Output 2-fold /2xMCB/2x3 Leads
KNX Output 4-fold /4xMCB/4x3 Leads
KNX Output 4-fold (2x2 Canal) /2xMCB/4x3 Leads
KNX Output 6-fold /6xMCB/6x3 Leads
KNX Output 8-fold /8xMCB/8x3 Leads
KNX Output 8-fold (4x2 Canal) /4xMCB/8x3 Leads
KNX Output 10-fold /10xMCB/10x3 Leads
KNX Output 12-fold (Start) /8xMCB /8x3 Leads
-> Output 12-fold (End ) /4xMCB /4x3 Leads
KNX Output 16-fold (Start) /8xMCB /8x3 Leads
-> Output 16-fold (End ) /8xMCB /8x3 Leads
KNX Jalousie 4-fold (2x2 Canal) /2xMCB/4x4 Leads
KNX Jalousie 4-fold (2x2 Canal) /2xMCB/4x5 Leads
KNX Jalousie 4-fold /4xMCB/4x4 Leads
KNX Jalousie 4-fold /4xMCB/4x5 Leads
KNX Jalousie 6-fold /6xMCB/6x4 Leads
KNX Jalousie 6-fold /6xMCB/6x5 Leads
KNX Jalousie 8-fold (4x2 Canal) /4xMCB/8x4 Leads
KNX Jalousie 8-fold (4x2 Canal) /4xMCB/8x5 Leads
KNX Lightcontrol 2-fold 1-10V /2xMCB/4x Cable
KNX Lightcontrol 4-fold 1-10V /4xMCB/8x Cable
KNX Lightcontrol 8-fold DALI /1xMCB/9x2 Leads
KNX DALI Gateway 1-fold (2x64TN) /1xMCB/2x2 Leads
KNX DALI Gateway 1-fold (1x64TN) /1xMCB/1x2 Leads
KNX DALI Gateway 8-fold /1xMCB/8x2 Leads
KNX Switch-/Dimm act. 2-fold, 1-10V/2xMCB/2x5 Leads
KNX Switch-/Dimm act. 4-fold, 1-10V/4xMCB/4x5 Leads
KNX Switch-/Dimm act. 8-fold, 1-10V/8xMCB/8x5 Leads
KNX Dimm actuator 2-fold /2xMCB/2x3 Leads
KNX Dimm actuator 4-fold /4xMCB/4x3 Leads
KNX Dimm actuator 6-fold /6xMCB/6x3 Leads
KNX Binary input 2x2-fold (int.Power) /2x5 Leads
KNX Binary input 2x2-fold (AC) /1xMCB/2x5 Leads
KNX Binary input 4-fold (AC) /1xMCB/4x3 Leads
KNX Binary input 4-fold (AC) /1xMCB/4x5 Leads
KNX Binary input 8-fold (int. Power) /8x3 Leads
KNX Binary input 8-fold (AC) /1xMCB/8x3 Leads
KNX Binary input 8-fold (AC) /1xMCB/8x5 Leads
KNX Binary input 9-fold (int. Power) /9x3 Leads
KNX Binary input 9-fold (AC) /1xMCB/9x3 Leads
KNX Binary input 9-fold (AC) /1xMCB/9x5 Leads
Low voltage Power Supply (Level 3)/1xMCB
KNX Binary input 2x2-fold (DC) /2x5 Leads
KNX Binary input 6-fold (DC) /2x5 Leads
KNX Binary input 8-fold (DC) /8x3 Leads
KNX Binary input 9-fold (DC) /9x3 Leads
KNX single Input canal 1x AC /1xMCB/1x5 Leads
KNX single Input canal 2x AC /1xMCB/1x5 Leads
KNX single Actuator canal 2x /1xMCB/1x5 Leads
KNX single Actuator canal 3x /1xMCB/1x5 Leads

 

KNX Jalousie 4-fold /4xMCB/4x4 Leads

Each channel is individually fuised and is guided over a four-wire line to the outside.